Home > Disc Read > Ps2 Disc Read Error White Gear

Ps2 Disc Read Error White Gear


Turn off the Playstation 2 from the rear power switch once it's been opened. check the connection at the other end, on the top of the box. At first it is not so bad, ... 1 Step 1: Materals"Disk Read Error'"PS2 Big Phillips head Screw Driver Small Phillips head Screw Driver Flat Headed Screw Driver Pen or Sharpie Your California Privacy Rights. http://fapel.org/disc-read/ps2-disc-read-error-blue-disc.php

me (#2505) July 12th, 2006 I tried this fix on my PS2. I tried loading stuff from my mp3 player being the only usb device drive i have but to no avail. I do not hear any loud cranking noises, however there is sometimes a high speed whizzing sound before the disks are declared crap As mentioned my many people above, the solution Clean the laser lens with rubbing alcohol, and lube the disc tray rails.

Ps2 Slim Disc Read Error Fix

email me or talk to me on msn at [email protected] jordan smart (#2377) May 8th, 2006 know how there is 4 silver screw at each corner once you have opened the look on the right side of the inside, and you should see the end of the cable in question with a blue tip, and a small slot anchored to the green After following the instructions, my PS2 now doesn’t read anything. After that it never would turn on.

We brought it home and he was right. Instructables was the first place I looked.Not much help here. You’ve saved my PS2, my money and my sanity, and the pics were helpful too. Ps2 Laser Adjustment Birdtross 15.111 weergaven 13:51 GTA San Andreas - PS2 VS PC [Part 1] [In-depth Comparison] - Duur: 7:51.

They gave us a brand new one and told us we could bring it back if it didnt work either. Deze functie is momenteel niet beschikbaar. Please check the address and make sure all letters are lowercased with no spaces.

I’ve no problems at all out of the 50001 until earlier this week.

This may not be being contacted when the laser moves down and grinds. 4. Ps2 Disc Read Error Easy Fix All the new games are easily available to be played on a play station. Just to think that I found a PS2 in the trash and your FAQ basically got me a free working console. I can’t believe it worked!!!

Ps2 Disc Read Error Fix Without Opening

NickTheGameBastard 199.168 weergaven 9:27 How to clean your PS2 lens - Duur: 4:00. Bonuses Where does the film-like peice go and how do I reconnect it? Ps2 Slim Disc Read Error Fix U can now see a fuse there as well! Ps2 Disc Read Error Guaranteed Fix It is not a permanent fix, but it certainly helps.

It made awful grinding noises. this page Laden... Thanks bandu (#2446) June 27th, 2006 Continued from above post… It looks as tho the round thing next to the laser is stopping the door from closing. Just try starting both gears at the same point, and gradually move each gear (equally) 4 or 5 clicks between each test. Ps2 Disc Read Error Clicking Sound

I followed your instructions, and lubricated the little arms the laser moves on, and it’s good as new! It was getting disc read error and he opened it up to fix it. The layout is different on them (The heatsink is next to the disc drive on the 8 screw.). get redirected here Thanks for saving us $140.00!!!!

Anonymous (#2303) March 16th, 2006 yo thanks ur help really worked!!!!!! How To Make A Ps2 Read A Disc Thanx a bunch Matt (#2502) July 11th, 2006 My ps2 is very frustrating. you might be able to play some DVD movies, but your favorite one never loads, or you can only play PSone games and not silver-colored PS2 games ?

Make sure that your PS2 is unplugged to avoid risk of shock. 4 Step 4: Adjusting the Optical LensRemove the disk cover and plug in the PS2.

Please do that and leave me a message when you have so that we can publish your work. If done correctly the system shall turn on, and the worm gear will spin and the laser will move down.Then the plastic will push the button in and start reading! Pull up lightly on the plastic that is on the worm gear, and slide the laser down. 5. Ps2 Won't Read Discs so as the lens gets weaker you can make it stronger.

it is not ment to completly get rid of the problem but just keep you ps2 alive

Take note of where each screw came from as these screws must be reassembled in the correct order. (Some bigger than others)2. Allow glue to dry FULLY! Even though my PS2 was different than the pictured one, nothing had to be done different. useful reference Remove off the dust with the help of vacuum cleaner (if available) or cotton buds.

Unfortunately, I couldn’t find any adjustment that would work for the games that wouldn’t load… FRANCIS (#2236) February 1st, 2006 my ps2 model is SCPH-50006 AND HAS NO WHITE GEAR THE Club Soda and Salt » Blog Archive » You can thank me later July 21st, 2006 Carlito Corway (#2530) July 22nd, 2006 I have repaired many Play Station 2 consoles which Thanks Josh Boston for the tip! Okay, u know that grinding noise that everyone has been having lately?

It plays other games Ok but skips on some. It’s a slimline version something like 70002 or wateva. Using a felt-tipped pen or marker, put a line on the gear where it meets the metal notch, so you can always return to this spot if you have problems later. At first it is not so bad, just one or two of the games don't work, but after a while almost none of the games work.

Turn the lense upside-down and you'll find there are 2 screws (silver, phillips or torx) that you have to remove to take the upper little lens off. There seems to be a small cylinder part that sticks up, and to the right side of the cog is a metal stopper that keeps the “clicking” in place. I had two and didn’t want to mess with it. what wud make a clicking noise and prevent disc from being read?

I also cleaned the hell outta that laser and nope. Anonymous (#2248) February 6th, 2006 the little peice of film that connects the top of the console and the bottom came out of the bottom while I was cleaning it. Some instructions may vary or not apply for other models. Thanks!

I got it to read Socom II after oiling it up, gonna try adjusting the laser and I'll let you know how it turns out.

Sluiten Meer informatie View this message in English Je gebruikt YouTube in het Nederlands. I’ve adjusted the white dial and cleaned the lens but it seems to refuse to play GT3. This provides a reference point for the original position of the gear as we prepare to make our adjustment(s). But i appreciate it anyways.