Ps2 Scph-39001 Disc Read Error
I have checked for dust, and cleaned the cables, and nothing happened. this was a rented game and im worried.. If it dont work the first time (It did for me) try again, sometimes it takes a few trys. Either your laser is being obstructed by dirt and dust, or the laser's voltage is not properly adjusted. http://fapel.org/disc-read/ps2-scph-50001-disc-read-error.php
after doing this i saw that the white gear had reset itself back to its primary position. Thanks Brandon Mark Kearon (#2376) May 8th, 2006 Ok i followed the guide you have provided and i relised that i dont have a white gear in the back of my When I put a disc in, the laser goes up too high, and grinds on the disc and when I tried this when it was opened up, the freakin’ disc almost THANKS YOU SAVED A LOTTA DOLLA$$ Jeff (#2478) July 3rd, 2006 thank u so much i thought i was lost but then found this it helped so much ty Lloyd (#2481) http://www.instructables.com/id/PS2-Disk-Read-Error-Fix/
Ps2 Slim Disc Read Error Fix
your... If you have oiled the bars and the laser still fails you may need a new worm motor. I made my screwed up ps2 really quiet by doing these. King9999Can you record games on to the HDD?
I've had good results, and so have many others. I googled my question, and followed your instructions, which were clear and precise. The problem is that the ps2 isn’t sensing that the door is open, and shuts itself. Ps2 Disc Read Error Clicking Sound turn both white gears until laser drops to bottom dead centre.
Joel (#2197) January 7th, 2006 You must be a genius ! My ps2 is the SCPH-30003 R, and it’s pretty screwed up. when i click on the browser screen it says that theres a game in the ps2 but when i click on the game it just goes back to the same screen.
Try cleaning the problem disc, or using disk doctor.
It also made some sort of buzzing noise. Ps2 Slim Laser Voltage Adjustment If not reverse process ∧ 10. They're out there be careful. Hopefully its something as simple as that.
- It seems to SEE the disc, but it isn’t willing to play the game or dvd.
- Now, if you have one of these PS2 consoles twin wheel gear mostly on the SCPH-50003 models or earlier i suggest you do this.
- Click HERE for Repair Estimate FormClick HERE for DIY PS2 Troubleshoot & Repair GuideClick HERE for Wet Lens Cleaner Worn out laser gear. Most common model to have this problem is
- TRAY FIX: Is your disc tray having problems?
- If you will carefully read Matt’s instructions, he clearly states that the tape holding the power connector is not important.
- some weirdo told me that it was the lens is the problem but i am not so sure about it.
- Any suggestions??
Ps2 Disc Read Error Fix Without Opening
good news- It worked (reads discs) so thanks for that bad news- now its audio and video transmittion is very slow and it loads quite slowly did i do something wrong, http://arstechnica.com/civis/viewtopic.php?t=3285&start=160 But i appreciate it anyways. Ps2 Slim Disc Read Error Fix Place a small spacer between the metal and the plastic tab so the plastic tab is slightly lower. Ps2 Laser Adjustment Guide They helped alot for me to get in there and id the problem.
Any recommendations on good lens cleaners that I could pick up at Best Buy or Circuit City? this page me (#2505) July 12th, 2006 I tried this fix on my PS2. I've gotten farther on the latter three than I've ever got in one sitting of Contra. best of luck to you. Ps2 Disc Read Error Guaranteed Fix
Thomas (#2426) June 11th, 2006 tried this method before i read about it… it worked. I’ve had it for about two years now, no problems. Related Questions Internet Browsing on PS3 February 24, 2012 I'm not turning Japanese, so must sell it. http://fapel.org/disc-read/ps2-disc-read-error-scph-50003.php Come to think of it, you probably shouldn't use silicone oil.)5- Duster Gas or something to blow the dust out of it with.
dobrien75 Ars Tribunus Militum Registered: Mar 6, 2001Posts: 2971 Posted: Sun Nov 09, 2003 5:38 pm Great timing. Scph 50001 Disc Read Error What can I do to get this laser working??? or is it a lost cause now?
I have found the right setting for the wheel so as to play all four types of discs that a ps2 can play, however, after I put it back together, I
Remove your warranty sticker, located next to your power cord. Thank you- I’m sure there’s a chunk of good karma headed your way. You’ll have to check your system to see where the switch should be. 9. Ps2 Slim Laser Adjustment So I fixed that, and dusted the inside, but it still doesn't work.Any suggestions?
Tools / Stuff needed: Q-Tips, Compressed air, 99 - 100% IPA, #2 philips screwdriver, #00 or #0 philips screwdriver, hex or allen keys, #7 - 9 torx. #0: Unplug your PS2 Hardware failures happen regardless of platform (and, as an addendum to my previous self-link, my PS2 is still fine several months and a hundred hours of GTA: San Andreas.)posted by Danelope Need help ordering? useful reference Lord, I knew about the DVD-RW badness, but what's your opinion on the best kind of DVD to use if one is to burn PS2 games: DVD+R or DVD-R?
Don't know if that's a problem. If you are having problems with both, do one at a time. for the info and instructions. Seems like it's just a way to get the cd unbalanced to me...
Simply put the top of the case on its side while you work. #4: Don't touch the power supply! #5: Remove the TINY black jewelers screws holding the lid of the At this time the game freezes like for ever until I smash the box pretty hard and get it on track. To do so, go to the Eclipse workspace in the file manager (e.g. Email me ok..Thanks..
mAxximo Ars Scholae Palatinae Registered: May 7, 2002Posts: 1163 Posted: Fri Nov 14, 2003 10:31 am On Clicking Sounds and ErrorsMy nephew pulled the controller's cord while playing and my PS2 And I have the same problem as other posters (Jo for instance) I can play audio CDs, blue disk games but not PS2. HELP ME PLZZZZZZZZZZZZ!!!!!!!!!!!! I need to know how to get to the gears for this model so i can adjust the laser.
If it’s broken then take a thin piece of plastic that matches the hight and width of the broken, or missing piece and super glue it to the place where the Too much and you *WILL* destroy the laser for sure! #14: Some less common problems are bad grease (you can use light household oil to grease up the sled and tracking I had to swab off the lens with a qtip and rubbing alcohol before I got mine working again. I was an early buyer & I hear this was an issue common to the earliest revisions.
Newer PS2's don't have this, but yours does. Jordan (#2412) May 26th, 2006 Hey i got a free ps2 the other day which read nothing at all and i adjusted the laser angle cog.